In terms of its structure, the size of each template is very standard, and the surface of the mold can be ensured to be very smooth and even from the overall view. This is because when making the mold for the anti-collision pier, each set of mold has its own customized drawing paper, so the edge of the mold is smoother, and the position of the edges and corners is more standardized To ensure the quality of the anti-collision isolation pier, first of all, the quality of its raw materials, that is, the quality of concrete. Only the concrete that meets the requirements can be made. And after a long time of storage, the concrete that has been affected by moisture can not be directly used in production. It can be put into production after screening, except for the quality of concrete In addition, the pouring method of the mixed concrete is also very important. During the blanking, the concrete should be uniform and continuous, and a large amount of concrete should not be poured into the anti-collision pier mold directly. After the high-pressure impact, it is easy to cause the dislocation and deformation of the formwork. After the blanking is completed, the vibrating rod should be inserted up and down for 4-5 times When vibrating, pay attention to the state of concrete. The sign of stopping vibration is that the concrete will not sink any more and bubbles will not appear on the surface.
The price of cement isolation pier mold is determined according to the mold specification and the price of raw materials. We must attach great importance to the cultivation of enterprise spirit if we want to seize the opportunity in the face of new challenges and obtain sustainable development in the more fierce market competition. Of course, while cultivating the enterprise spirit of employees, we should introduce advanced energy-saving technologies and equipment, at the same time, strengthen the ability of independent development, base on scientific development, and focus on independent innovation; deepen the combination of enterprise system energy-saving and process technology energy-saving, promote the sustainable development of enterprises; energy-saving work has a long way to go, and every enterprise should take active action.