The isolation pier mold is generally made of steel plate. The larger the size, the higher the design density of the external support structure, and the greater the thickness of the corresponding support plate. The thickness is generally kept between 5-8mm. During the welding process, the welding should be evenly distributed, so that not only the high temperature will not be generated, but also the more important bearing capacity will be very good It is the key point to produce no deformation to evenly separate the forces and keep them in the same supporting force on multiple surfaces. The mold of isolation pier is customized according to the specific mold drawing style. Taking the use of isolation pier in cities as an example, most of them are relatively short, and the manufacturing length of this kind of mold is generally based on 2M, which can be found by photos. The use of the mold of the city isolation pier effectively meets the needs of traffic separation and safety.
he specifications of the isolation pier mould are basically 1.5m or 2m long, and the height of each set is 50cm, which belongs to the category of long and small, and many of them are used in Shandong area. In the production of the mould, the city isolation pier mould factory has fixed drawings for reference, so as to avoid the possibility of blind production. The two sides of the mold are basically perforated, which is the so-called separated isolation pier mold. The advantage of this is to reduce the use of prefabricated blocks of isolation piers, thus increasing the use of other steel pipes. To continuously promote the development of China's mold industry, it is necessary for the whole industry to work together to produce a good and satisfactory mold, which will be supported by people from all aspects.