The anti-collision wall mould is produced in strict accordance with the requirements of construction regulations. According to the requirements of the anti-collision guardrail template making, it adopts the form of split structure assembly. According to the design standard of concrete guardrail, most of the moulds are mainly connected from top to bottom and left to right. The use method of bump-proof guardrail template is customized according to the requirements of design drawings, and the main form is based on the two production forms of roadside bump-proof guardrail and central bump-proof guardrail. Generally, the steel template of central bump-proof guardrail is less customized and the roadside is more customized. The difference between the two is that the roadside guardrail has a straight board, while the central guardrail is all. It is in the form of inclined slabs, and many highways require tooling on the top so that warning lights or other facilities can be placed. According to the requirement of crash barrier die making, it is usually in units of per meter.
In recent years, the development of road construction is faster and faster. It is very troublesome to use brick method to make guardrail, and it takes a long time to use huge human resources. So this traditional method has been eliminated bit by bit by people. Instead, it is to use anti-collision wall mould template to make anti-collision wall. This kind of template is to use anti-collision wall mould template to make anti-collision wall. A very convenient tool, each component can be disassembled. When we install or disassemble it, we can use electric wrench, which saves time and effort. The anti-collision wall mould can be used together. It can produce more than ten meters of anti-collision wall at a time, and the guardrail is integral. The anti-collision effect is very good. Generally, it will not be cracked or knocked down, as long as more. The whole fence can be made in a few times.