Isolation pier moulds are based on specific highway usage. Generally, the isolation piers produced by isolation pier moulds are placed in the middle or on both sides of the highway. Most of them are in the middle, and the two sides are generally replaced by roadside stones, so that the cost of concrete can be saved. Isolation pier moulds, prefabricated isolation pier moulds and cast-in-situ isolation pier moulds are usually set in two blocks, which can ensure better anti-collision and separation effect. As a road safety guard, the prefabricated isolation pier not only serves as a simple separation of vehicles, but also plays a role in preventing collisions and protecting pedestrians (such as non-motor vehicles). Because of the development of science and technology, the cement isolation pier guardrail gradually replaces the iron guardrail. Because the iron guardrail is easy to corrode, cost is high and damage when it meets the water, the isolation pier prefabricated by the isolation pier mould is gradually widely used. The cement isolation pier is simple to make, prefabricated by cement, corrosion resistance, strong environmental adaptability and cost. Cheap price, long service life.
The demand of isolation pier mould is made according to the size required by highway or engineering construction. The size of isolation pier mould is different for each engineering construction, but the manufacturing process of the mould is the same. The prefabricated isolation pier mould needs drawing to help in the processing of the mould, and the specification of the mould needed is made well in advance. Ge, the use of small isolation pier moulds is generally in residential areas, in line with the use of a smaller environment. Small isolation piers and large isolation piers are mainly used in different locations. Small isolation piers are usually used in residential areas, squares and other places. Large isolation piers are mainly used in expressways. In the structure of isolation pier, it often appears in the form of large and small heads, and according to the size of the volume, the scope of use and format are different. Continuous isolation pier and separating isolation pier are the main production forms, which are embodied in the content of the die whether the two sides are open.