About the introduction of the mould of the central isolation pier, the general mould of the central isolation pier will choose the vibrating rod to produce when it is shaking. On the one hand, it is inconvenient to carry it, and on the other hand, it will be heavier if it is filled with a lot of mud, so it will be more convenient to use the vibrating rod, not only this way. When grouting, the mould should be placed directly in the ventilation area, so that when the air-drying environment is carried out, the removal of the mould can be omitted and the air-drying can be carried out directly.
The mould of the central isolation pier can be disassembled and processed, because the difficulty of demoulding is considered in the production, so the mould can be made into a state of splicing. The bolts can be taken out directly during the subsequent demoulding, and then the complete isolation pier prefabricated parts can be obtained by disassembling the mould. The use of moulds for municipal isolation piers has made a great contribution to the construction of the city, because the installation of isolation piers is not specific requirements, and can be installed in various environments, such as the parking lot of hospitals, the entrance of schools or the periphery of shopping malls will be used isolation piers, whose specifications are diversified and developed. Flexibility is very good.
In the manufacture of the mould for the central isolation pier, the width of the expressway should be measured first, and then the mould for the high-speed isolation pier should be customized. If the thickness of the isolation pier is relatively wide, the thickness of the isolation pier can be increased appropriately. And the length of the high-speed isolation pier is usually one meter or two meters, which can be more stable. And reduce the impact strength of the vehicle, reduce the injury of the vehicle. Moreover, the high-speed isolation pier mould can be reused to help reduce the production cost of the project. The high-quality steel is selected for production, which can make the use of the central isolation pier mould longer. Regular maintenance, cleaning and protection are also very convenient.