With the construction of high-speed railways, highways, and water Conservancy projects in China, the demand for various molds is also increasing, and the demand for molds is in short supply. In order for the mold industry to develop, it is necessary to continuously increase research and development funds and increase the content of science and technology. Production of core competitive products. Only by increasing the research and development of products can we really change the current competition pattern. The isolation pier mold is a mold for making concrete pre-products. The product needs to be preformed and then used. The prefabricated concrete isolation pier is used in the center or on both sides of the road to separate the boundary of the two-way road and play a collision prevention role. The shape of the isolation pier mold is trapezoidal, narrow and wide, with a very good stability, but also can save materials, energy conservation and environmental protection. The design of the cement isolation pier mold is a vertical mold, and concrete is injected from the bottom of the steel mould of the separation pier. In this way, the four facades and top surfaces of the separation pier produced are smooth. Only the bottom surface is rough, but the bottom of the isolation pier installed on the road is invisible. So it's neat and pretty on the whole. The isolation pier steel mold is face down at the time of production of the isolation pier. It can be removed after the initial solidification of the concrete. Before the removal of the mold, the isolation pier steel mold is first turned down along one side, so that the bottom of the mold faces down, and then the cement. The screws on the isolation pier mold are removed one by one. Do not use brute force to remove the mold, so as not to damage the mold.