The features of the anti-collision wall mold are mainly on the style and specification of the concrete anti-collision wall. The structure of the general anti-collision wall mold is two pieces assembled, and the continuous plate and an arc plate are combined for use together. Especially, the design requirements of the arc plate meet the requirements of highway safety construction, and the arc will be set up for the beautiful top. The anti-collision wall die is used in steel mould with large amount, and the production mode is also special, all of which are used in cast-in-situ operation. There are two situations for the mould reinforcement of the anti-collision wall. Generally, the cast-in-place reinforced concrete beams and slabs have been embedded and installed in place during the construction of the box girder. During the construction of the anti-collision guardrail, the embedded reinforcement has certain deformation, desoldering and other phenomena, which need to be sorted out first, mainly the position of the vertical main reinforcement in place, and then the horizontal auxiliary reinforcement is sorted out, re bound, and the repair welding is carried out if there is desoldering phenomenon; Precast reinforced concrete beams and slabs are generally embedded locally, and the upper reinforcement of anti-collision guardrail shall be installed in place according to the design drawings. All reinforcement can be transferred to the next process after inspection and acceptance
在防撞墙模具有关行业知识是依照过去针对混泥土防撞墙的生产方式开展的，从公路两边应用的防撞墙款式看来，全是以直板和弧型板的款式出現的，在大家的生活起居中拥有 很重要的功效，他一般 是用以大家公路、公路桥梁两侧的路面上生产防撞墙的专用工具。在应用时，必须将二块厚钢板开展拼凑，随后应用止水螺栓越过将模具左右各自开展固定不动。我们在平时的公路安全性基本建设施工现场常常会应用防撞墙模具开展防撞墙的生产。
In the anti-collision wall mould industry knowledge is carried out according to the production methods of concrete anti-collision wall in the past. From the perspective of the anti-collision wall styles applied on both sides of the road, all of them appear in the style of straight board and arc board, which has important effect in our daily life. He is generally used for the highway Special tools for producing anti-collision walls on the road surface on both sides of highway bridges. In application, two thick steel plates must be pieced together, and then the water stop bolts shall be used to fix the left and right sides of the mold. We usually use the anti-collision wall mould to produce the anti-collision wall in the highway safety infrastructure construction site.