The mold of highway isolation pier is widely used in roads, expressways and other places. The steel mould products of highway isolation pier are easy to use and fast. The mold of the isolated pier of expressway is one of the isolating pier mould. The tablets contain good impact resistance and anti-aging characteristics, and are not easy to corrode and deform. It is easy to construct, with generous appearance, high hardness and environmental protection. Generally, steel mould concrete pouring and forming is used to produce various sizes of steel mould for isolated pier of expressway. The dimensions can be customized according to the drawing requirements. The outer part is fixed with angle steel. The joint is formed by snap and screw combination. The disassembly is convenient and the production process is simple. The field production is not limited. It is a new type of steel mould for cement prefabrication.
The mold of highway isolation pier is set to prevent vehicles from rushing outside the road or beyond the bridge, which is usually found in highway bridges. In order to reduce the danger caused by vehicles to surrounding areas, and prevent vehicles from rushing out of the bridge, the product is also set up. As an important part of the bridge deck system, the steel mould of isolation pier not only bears the safety responsibility, but also directly affects the beauty of the bridge. Therefore, how to control the construction quality of the products has become an important problem. The use of the isolating pier mold has become a new fashion. The product is customized according to the customer's size, which is mainly mass production. At the same time, the surface inside of the mold is smooth, which increases the smoothness of the surface of the cement products. The surface of the cement prefabrication made by the formwork is smooth, without cracks, and easy to demould and easy to use, which has become the main production technology in the market.