The anti-collision pier mold is a steel mold for cement products. The production process of this kind of anti-collision pier mold is relatively simple. It can be produced by using plastic mold or steel mold. The size and specification of isolation pier mold are relatively large, and steel mold production has certain advantages, Now the mold market competition is more and more fierce, customers will consult several companies for comparison when ordering, and the mold Market in the future is becoming more and more difficult. The state vigorously builds high-speed and high-speed railway, and the demand of steel mould for isolation pier is also increasing every year.
According to the process standard of customized anti-collision pier mold, we must consider whether such product can guarantee the quality of isolation pier when selecting isolation pier mold. Traffic isolation pier mold can be said to be a good choice. We can choose some domestic products. The result may be cheaper, but the quality of the product can be guaranteed. The mold of isolation pier is made of at least 3 thick cover plates, and the thickness of rib plate is not less than 5 thickness, and the quality of the whole set is at least 1 m. Moreover, the mold operation of traffic isolation pier is very convenient.
For the use of anti-collision pier, there are many advantages. First of all, when it is used in the accident prone area, if the car is out of control and hit, when the vehicle collides with the isolation belt, it can slow down the speed of the vehicle, and make the car stop stably, reduce the multiple collisions of the car, and reduce the casualties of the vehicle and the personnel in the vehicle The loss should be minimized. And the cement isolation pier is often pasted on the top part of the more eye-catching reflective film, so in the night situation can also let the driver see clearly, the cement isolation pier can effectively play a warning effect on the driver.