There are many kinds of irrigation channel mold products, including flume mold, drainage channel mold, drainage channel mold and other series of products. We can provide the design drawings and product pictures of drainage channel mold according to the needs of customers. The sizes of drainage channel mold of Hongao mold are various and different. Change the sizes of mold according to the design drawings With the continuous updating of products, higher requirements are put forward for the performance of steel mould, such as corrosion resistance, cutting performance, etching performance, etc. The price is different according to the material of the drainage channel mould, and the design is generous. In the process of die blanking, when the drain channel die is used, it must be filled with sand and water to play the role of anti-collision. At the same time, the steel is characterized by light movement. So the internal water is a good choice, because after use, the water can be quickly released, and then moved to the next required location. The price of internal sand is higher than that of water, and when sand is exported, It's also a bit troublesome. It's suggested that you should fill water in the interior. Whether the manufacturing equipment of the drainage channel mould is excellent or not is directly related to the technical level of the mould.
The use of irrigation channel mold has replaced some traditional production methods. It can make the required products in advance and then put them into production. During the construction of prefabricated flume mould, the steel plate material is directly transported to the construction site, and then the steel plate is spliced and assembled according to the size specified in the drawing and the customer's requirements. The assembled steel plate material is tightly connected by bolts to form the mould we need in the production process. After the mould is fixed, the mud mixed with concrete will be mixed Pour it into the mold, and then use the vibrator to stir and vibrate to eliminate the bubbles. During the construction process, the mold cannot be moved at will. After a period of standing, the mud gradually solidifies and forms, and then carries out the membrane removal treatment. The mould of prefabricated flume will not deform easily, so the stability of the mould is better in the construction process. The prefabricated products are directly used after processing, which is a more time-saving and labor-saving method. The way of production through prefabrication saves the construction time, and at the same time, the production quantity also meets the production demand, which is more practical A kind of production mode, the mold after the film removal can continue to be constructed, which not only saves the cost but also saves the construction time.