The anti-collision wall formwork can be divided into customized dimensions according to the requirements of the construction party, with the general height of 50mm, 1000mm, 1500mm, 2000mm, etc. the anti-collision wall formwork, high-speed anti-collision wall formwork, and the highway anti-collision wall formwork manufacturers can select raw materials according to different heights, such as 50mm with 2.75 ordinary steel plate, if the main reinforcement is with steel plate, the steel plate can be 80mm * 60MM steel strip, also known as steel strip, or flat iron. The quality of the strip steel depends on the carbon content. The strip steel with high carbon content has good hardness, the production mould is not easy to deform, and the construction is convenient. The strip steel is divided into cold-rolled strip and hot-rolled strip. The anti-collision wall mould generally uses hot-rolled strip, and the hot-rolled strip is processed by heating, layer cooling, phosphorus removal, rough rolling, finish rolling, surface inspection, polishing and other procedures. Baoding Lefeng The anti-collision wall formwork produced by Mould Manufacturing Co., Ltd. is made of high-quality steel strip as raw material, and the mould is more solid and durable.
When using the anti-collision wall formwork, it needs to use the connecting rod, because the two-piece anti-collision wall formwork cannot be fixed on the ground, so there will be screws on the top and both sides to fix the mold, and the top arc device has been welded on the upper surface when producing the mold. With the development of society, the production and development of anti-collision wall mold are affected by various international and domestic factors. China's economic growth is slowing down, and the economic growth is also affected by a certain mold industry. According to the analysis, however, it should not be seen that the problem is too serious, and the scale of blind expansion of medical investment is strong.